Nowadays, marble is mostly used to decorate the ground.The marble should be all around kept up with when it is utilized. The gas marble can only be used more effectively and for longer periods of time if it is well-maintained. However, how well-versed are you in the marble polishing procedure? When polishing marble, there are actually a lot of issues that need to be taken into consideration. Next, let us to explain the marble polishing procedure and safety precautions.
What is the marble cleaning technique?
1.Before using the marble, the surface should be thoroughly cleaned. The marble’s crystal powder should then be applied to the red polishing pad by combining it with water to form a paste.During the second mopping operation, keep the ground wet.Use a water-absorbing machine to absorb the ground paste when a high-gloss crystal surface appears on the marble’s surface, then use a mop to remove the remaining paste and dry it with water.
3.To completely dry the ground, polish it with a white polishing pad or wipe it with a dry cloth.The visual effect will be affected if the stone surface is not completely dry.
Consider the following:
1.The surface of the stone ought to be smooth and dry.Utilize animal hair or nano wool pads as much as possible to dry the ground to approximately 50 degrees after refurbishment, and then perform crystal surface treatment.Clean steel wool and pads for cleaning are used.
2.It should be sealed as soon as it is finished. Stop the stone right away if it starts to give off glass light. Use a neutral refurbishment paste and a neutral crystal surface agent.Stone day to day support type gem hard treatment: As long as the conditions permit, this is the best approach to maintenance, and it ought to be utilized as much as possible. Materials and tools:stone care equipment (a floor brush), a vacuum, a red cleaning pad, a flexible polishing pad, steel wool, a watering can, a dust pusher, a crystal surface maintenance agent, and a crystal hard powder.
What precautions should be taken when polishing marble?
1.Use a water-absorbing machine to treat the moisture on the ground following grinding, and then use a blow dryer or natural air-drying to dry the stone floor as a whole.Use the marble polishing machine to grind while evenly spraying the potion; use the cleaning machine’s red cleaning pad; sprinkle the ground with the same amount of water as the potion; and begin grinding.The crystal surface material crystallizes on the surface of the stone as a result of the action of thermal energy.The surface effect
2.The lower limit of the polishing machine’s linear speed is appropriate for difficult-to-polish granite with a high quartz content.The stone grinding machine used to make granite tiles has a small diameter and can run at a linear speed of 35 m/s.The mechanical force of grinding, diamond wear, and the properties of the stone being ground all depend on the grinding depth, which is an important parameter.When the stone grinding machine’s linear speed is high, a small cutting depth should typically be chosen, which can range from 1 mm to 10 mm.
3.When grinding granite blocks with large-diameter grinding machines, the feed speed should be decreased while the grinding depth can be controlled between 1 and 2 millimeters.A large cutting depth ought to be chosen when the stone grinding machine’s linear speed is high.However, a greater cutting concentration ought to be utilized for cutting within the permissible range of saw machine performance and tool strength.A small depth cutting should be used when grinding the stone’s machined surface is necessary.
4.To increase the crystal surface hardness of the ground as a whole, the stone should be repolished and painted with a marble protective agent if it has a lot of porosity.Use a polishing pad to polish the ground to make it completely dry and bright like a mirror after the surface of the stone has been transformed into a crystal mirror using a vacuum to remove any remaining moisture and residue.
How to polish marble and safety precautions are covered in detail in the preceding article.In reality, marble maintenance is the process of polishing marble.However, polishing marble is a fairly straightforward process.You can complete the polishing project as long as you understand more and follow the instructions.
